mossberg 500 835 590 trigger assembly part 3

Description

mossberg 500 835 590 assembly guide

Tags: mossberg 500 835 590,trigger asembly guide

Video Transcription

you get these two back together here and there is a union right here that these have to pop back into it's not really a big deal just get in there this is one of those parts that just takes a moment little bit patients but you'll get it there we go everything clicks back together don't stop until you hear the click make sure your spring your trigger spring is seated and correct it in the correct position if you have an old gun trust me there will be a mark on your gun telling you where that spring goes that Springs been sitting there for however long making an indentation on works for the Skip but it should all just go right back together now what I was talking about with that spring that we left hanging up there obviously you can see that we take our screwdriver just kind of push that and it will snap right underneath that rod there and there you go now so one of the hard part is putting your trigger pin back in in all these pins trust me they don't want to go back in you really have to line things up and get your light line your holes up if you get frustrated step away from a for a moment don't get a hammer start beating things and kicking the doll or anything like that be patient things will click back in

there you go there's that back together again now this is your rod that goes against the hammer there's a little indentation there that means to be point it down just like this and it goes in a little cup that's underneath beside the trigger actually and then the hammer there's a pin that goes together with and then you put your hair pin back in this is one of the hardest pins to get back in cuz it's under tension you need to find out where it goes and then put it back and there you have it trigger assembly back together again I do not advise you dry firing this basically because slams up against their can cause some damage just you know sprayer oil in there like I said make sure this is angled down or safety will not work and there you have it have fun